yer prolly lookin for a pic of the door w/ the rubber on, but maybe
this will do - correct [repro] seals from Steele Rubber, which they made from OEM seals I sent them off the NOS doors I found a few years ago - they're the only place that has'em [part #70-1730-72] - 80$ in '96, prolly more now, but worth it
my old panel was a daily driver in a wet climate for 15 years, and I can tell ya the
correct ends, corners, and clips makes the difference - otherwise ya gotta use a set of side door seals and fake the corners and ends, which didn't work well
as for yer side door leaks - get out the silicone, figger the path of travel of the water and put a bead down to channel it away - those doors around the dogleg are a poor design and prolly leaked from the factory - notice that any TF truck is rotten in the lower hinge pocket, the steps, and the bottom of the doors
the seals hafta be perfect, and glue helps as they get easily pushed out of place and chewed up
for you burb guys w/ the clamshell gates, Steele has the rubber for them too I believe, and according to my notes the rubber for the top gate glass is 70-1729-81
Bill
