Here is the dilema:

My 3100 is completely dissassembled, less stock driveline, suspension, etc 3100 Album

I can re-bolt everything that I have together, however I do not have original driveline or suspension. On the flip-side I believe that someone out there has the answers I need

I am in process of building an IFS front X-member that I would like to work with minimal sheet metal interference as well as with both an I6, or V8(in the event I chose to make more than one and offer to the general public). Anyone have a pile of pictures and dimensions of an AD without motor and with the front sheet metal in place, or better yet, anyone near enough to green bay for me to visit?

I need to know how high above the frame that the stock fenders come. What will need to be trimmed to accommodate the upper a-arms.

I also need to know where the stock engine, engine mounts, steering, and front suspension sits (which I do not have).

I do have the CL location from front of the frame.

Scott

The problems we face today can not be addressed at the same level of intelligence we were at when we created them - Albert Einstein Or with the same level of $ - Me