| |
Click on image for the lowdown. 
====
| | |
7 members (DadsFirstPickup, 51sub, asilverblazer, Youngin' Tut 59, Otto Skorzeny, amtrakjoe, moparguy),
69
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,180 Posts1,057,146 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#24016 02/20/2002 5:12 PM | Joined: May 2000 Posts: 234 Shop Shark | | Shop Shark Joined: May 2000 Posts: 234 | One problem with the original front axle on the '54 is the clearance between the wheel and the steering arm. On a stock wheel it's less than 1/2 inch - meaning if the offset of a later wheel is much different, it may interfere.
The bolt spacing is identical, but the size of the hole is slightly larger (due to larger lugs) on the later wheels. I am using early wheels on a later axle with no problems.
-Boyo
'48 Willys CJ-2A / '55.1 Chevy 3600 / '66 Austin-Healey 3000 / '04 Volvo wagon (parenthood!?)
| | |
|
|
| |
