| |
Click on image for the lowdown. 
====
| | |
7 members (wilbur53, BC59, 55shaker, Lightholder's Dad, Gdads51, UtahYork, Hanks custodian),
74
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,048 Posts1,055,538 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#23627 12/08/2001 5:42 PM | Joined: Aug 2000 Posts: 523 Member | | Member Joined: Aug 2000 Posts: 523 | Did you measure the crank pin and the bore of the rod?You need to do that before talking to Carter's......If it looks from those numbers like you should have the right clearance then the problem maybe in the edges of the bearing
They maybe too wide or the chanfer is fouling the radius
Measure this first...with proper tools NOT PLASTIGAGE!!! | | |
|
|
| |
