| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,081 Posts1,056,078 Members48,434 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#22186 12/04/2001 12:23 AM | Joined: Jul 2001 Posts: 140 Shop Shark | | Shop Shark Joined: Jul 2001 Posts: 140 | try either liquid wrench or a carb degunker. Either should work. Just spray it on the shaft and down the carb, then open and close the throttle by hand, and it should loosen it up. If it doesnt, there might me an obstruction keeping the throttle from closing. Sometimes the gasket between the carb and the intake wasnt manufactured correctly and it will be in the way of the valves. Good luck. Thanks for the napa number.  
Jonathan S. Keffer
Certified Yeti Trainer
Richard Roy Schlicht-
Good Grandfather, Veteran Wrench Turner...
"If it ain't broke, fix it 'till it is..."
Es gibt nichts, zu befürchten, aber befürchtet sich.
| | |
|
|
| |
