it really is fairly easy
at least mine was
take the wheel off, use a screw driver to pry that bearing from the end of the shaft. you can possibly re-solder the (a) new wire to it. pack the bearing b4 replacing it
the wheel removal will be harder than the bearing removal
Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe
Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE
| 
