| |
Click on image for the lowdown. 
====
| | |
11 members (Rusty Heaps, Wally / Montana, Tronman, Steelonsteel, Peggy M, Scott, klhansen, Jon G, Hotrod Lincoln, 2 invisible),
75
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,206 Posts1,057,433 Members48,471 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#21583 05/20/2004 2:40 PM | Joined: Mar 2003 Posts: 27 Junior Member | | Junior Member Joined: Mar 2003 Posts: 27 | Thanks to those who told me what size the fuel line should be in my '38 1/2 ton. This is a great forum!
Next question: What are the "proper" fittings for a 5/16 fuel line ? The outside diameter of the threads going into the carb (Carter W1) seem to be about 7/16 inch, and the fittings currently on the truck are of the compression variety - ie with a ferrule that slides over the tube. I talked to the folks at In Line Tube, and the only fittings they are aware of for 5/16 line have 1/2 inch threads, and they thought that the fuel line probably had flare fittings.
Any hints or ideas about what should be here ?
Also, where was the fuel filter located on this truck ?
Thanks again !
Alex Meade | | |
|
|
| |
