| |
Click on image for the lowdown. 
====
| | |
7 members (Hotrod Lincoln, Still At It, Otto Skorzeny, Uncles51, Guitplayer, Stovebolt48, Cosmo),
95
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,022 Posts1,055,384 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 196 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2005 Posts: 196 | Hi, The choke cable on my 66/292/Rochester 1bbl needs replaced. NAPA has one that looks like it will work. However, I'd prefer to have the original knob showing. Just underneath the knob on the existing cable, I can see a 'Flat' on the shaft. I would guess that this would continue into the knob but that wouldn't provide a good connection for pushing/pulling that the choke would need. Does it switch to threads, and does anyone know if the knobs on the generic NAPA ones screw on too. If so, do they have the same threads? Thanks.  Rance
66 C10 FS/LB 292/4-spd manual (I also enjoy Hang Gliding)
I'm too sexy for my hair, that's why it isn't there
| | |
|
|
| |
