| |
Click on image for the lowdown. 
====
| | |
7 members (Hanks custodian, 2-Ton, TUTS 59, Otto Skorzeny, festerhairball, HandyAndy, dt235sd),
82
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,060 Posts1,055,836 Members48,427 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#19685 12/10/2003 5:04 AM | Joined: Jun 2000 Posts: 2,773 'Bolter | | 'Bolter Joined: Jun 2000 Posts: 2,773 | The cam should be snug, but not tight. I've been told that if you can't turn the cam by hand using the gear, it's too tight. Two possibilities, either one or more of the bearings is too tight, or they are misaligned. First check is with mikes and snap gauges in hopes that you find a bearing that's too small. Whatever you find, it's going to mean a trip back to the machine shop, I guessing that you don't have the boring tools needed.
Fred
52 3600
69 C-10
| | |
|
|
| |
