| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,100 Posts1,056,513 Members48,448 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2004 Posts: 1,552 Shop Shark | | Shop Shark Joined: Nov 2004 Posts: 1,552 | Are you talking about the screws holding the door panel in place around the perimeter? If so, they have a capture nut in the door shell. Sometimes they strip out or the capture nut breaks free from the door shell and spins freely. In this case, you can drill them out and tap the hole. They are designed to come out, however they get pretty tight if they have not been taken out in some time and hit with some WD40. Good luck with your project.
Tony | | |
|
|
| |
