Do you have any existing hard lines at this point? Each component such as the master cylinder, wheel cylinder, etc. will be a specific size thread and nut diameter. That will dictate the steel tubing diameter. The copper-nickel line is easy to work with, my truck has a 15 foot bed and a Low Cab Forward, it took all of the 25 foot roll.


1957 Chevrolet 5700 LCF 283 SM420 2 speed rear, 1955 IH 300U T/A, 1978 Corvette 350 auto, 1978 Yamaha DT175, 1999 Harley Davidson Softail Fat Boy