Originally Posted by Gray_Ghost
Well...looks like a gap between the straight edge and bottom of head. You can see some light between them.... Daggone it!

That head needs to be milled flat- - - - -but if the machine shop takes more than 15-20 thousandths off of it to get it flat, be sure that they grind the intake valve seats back into the head the same distance that's milled off the gasket surface. That preserves the shrouding that protects the edge of the valve from being burned by the flame front across the combustion chamber as the spark plugs fire.
Jerry


"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!