See other Threads on this engine’s Teardown.
Today while inspecting the oil manifold ports at the crankshaft supports I got a big surprise, that being that there is what looks like a sheared drill bit or something like that at the #1 front crankshaft oil port. I’ve blown compressed air e into the hole and I can feel air coming out at the oil pump manifold oil line adapter fitting.
All other oil ports fed from the manifold are clear and compressed are flows well.
I’ve thought that the local engine shop could drill the blocks hole, extract whatever it is, and install a flush bushing to make up for amount shaved off. OR just leave it alone, and cross my fingers.
See attached picture. The in question here is the top hole not the blind hole.
Attachments
IMG_0444.jpeg (160.92 KB, 54 downloads)
IMG_0448.jpeg (149.47 KB, 47 downloads)
IMG_0448.jpeg (149.47 KB, 45 downloads)
IMG_0445.jpeg (112.56 KB, 46 downloads)

Last edited by TexasA&M48Truck; 10/28/2026 11:07 PM. Reason: Add pictures