| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
8 members (cmayna, ShopRag, Cosmo, Eisenholtz, 1955 1 Series, Bill Hanlon, Mike Roache, 1 invisible),
58
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,020 Posts1,055,267 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2020 Posts: 438 'Bolter | | 'Bolter Joined: Sep 2020 Posts: 438 | https://oldchevytrucks.com/catalogsearch/result/?q=Cowl+plateBy law The number plate on our trucks should be original to the vehicle and held on with the original clutch head screws. It should resemble the plate and screws in the above link though that plate looks different than on my 46. Even if the original is in very poor/aged/ragged condition it is better than using a reproduction. The numbers are stamped with 2 different stamp sizes. Chuck Below is Jim Carters thoughts on the subject https://oldchevytrucks.com/blog/2010/02/screw-on-id-plates/
Last edited by Hanks custodian; 07/25/2026 11:44 PM.
Hank: 46 Chev 1/2ton shortbed
2023 Miata RF Club
| | |
|
|
| |
