Finally after some thought about using copper for a bus bar I decided to use the pipe to hold the 30 amp circuit breaker near the starter on the firewall and another piece of the copper for the fuse block on the firewall for a mock up. I didn’t want to drill any more holes and found a few bolts sticking out with room. Need to trim the copper up and paint them but I think it will be easier access for wires. I’m hooking horn, light switch, regulator, and ignition switch from ammeter to the fuse block. Should wire from ammeter to fuse block be 10 gauge?
1946 Chevy Truck 216 1/2 ton "Tales from a weekend mechanic" Follow in the DITY
