The Stovebolt Site Forums The Shop Area Engine Shop 216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (dt235sd, Bucker, UtahYork), 160 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,196

Posts1,057,390

Members48,471

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder ShawnV #1602762 04/28/2026 9:41 PM
Joined: Sep 2011 Posts: 57 MN S ShawnV 'Bolter
ShawnV 'Bolter S Joined: Sep 2011 Posts: 57 MN	I finally had a chance to check the crankshaft endplay. It's .006" - right in the middle of the spec range of .003" - .009". Shawn 1950 3600 Pickup, 1958 Plymouth Belvedere

Entire Thread
Subject	Posted By	Posted
216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder	ShawnV	04/26/2026 3:52 AM
Re: 216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder	Hotrod Lincoln	04/26/2026 5:46 AM
Re: 216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder	ShawnV	04/26/2026 1:57 PM
Re: 216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder	WICruiser	04/27/2026 12:07 PM
Re: 216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder	Jon G	04/27/2026 2:49 PM
Re: 216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder	ShawnV	04/27/2026 9:23 PM
Re: 216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder	ShawnV	04/28/2026 9:41 PM
Re: 216 Camshaft Thrust Plate Not Even With Crankshaft Gear Shoulder	ShawnV	05/09/2026 6:49 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard