1941 Chevy


This was my first rebuild. It has a 235 with 3.55 rear-end.

I started working on this while I was still working on the north slope. I started real slow with no intention of having it turn out like it looks now.

It was nine years from start to finish. Most of the work was done in the last three years after I retired.

Early on I had a problem. At work I was almost always working with someone else but this time I was all on my own. I didn't have a very good work ethic working by myself.

My 46-7 was done in two years.

While taking things apart my thought was I'll remember where things went, haha not so. I've got better now with my third Art Deco truck.



This picture was taken at the farthest west point on the continuous US road system in Anchor Point Alaska.
Attachments
homer52.jpg (18.52 KB, 75 downloads)

Last edited by Peggy M; 03/08/2026 2:43 PM.

1941 Chevy
"First rebuild - complete!"
Follow the story in the DITY
1941 GMC resting peacefully
1946/1947 Chevy Street rod on s10 frame complete
1945 GMC panel truck in line for restoration
1941 Plymouth stock complete
1941 GMC COE in restoration process
Read his Project Journal
1941 Chevy Coe uncertain future resting now