I just finished the Heater on my '58 Chevy 4400 (Thor). Thought I would share some pictures. I had a local Radiator Shop recore the Heater Core. It is actually a NOS part he had for a '72 C10.

I blasted everything and cleaned up the motor. A fresh coat of Rust-Oleum Hammered Tone paint and it looks good as new.

I had 91° heat coming out of the unit, nice and toasty..😁
Attachments
73fbc7ed-0309-429a-8535-591fe0a28dd5.jpg (396.05 KB, 209 downloads)
Blasted pieces
20251106_180303.jpg (220.36 KB, 206 downloads)
Motor assembly
422650d1-0022-455a-8430-65bf91cec36c.jpg (277.7 KB, 206 downloads)
Unit assembled
3d3d9245-d924-4473-8d3b-a2650a08972e.jpg (230.08 KB, 206 downloads)
Nice decal
c7a51c23-64b8-469f-85df-9bfccdf9accb.jpg (154.09 KB, 206 downloads)
Installed under the dash
20251111_132305.jpg (247.18 KB, 208 downloads)
Heater Hoses and control valve
20251111_132648.jpg (94.86 KB, 208 downloads)
91 degrees on High

~ Craig
1958 Viking 4400
"The Book of Thor"
Read the story in the DITY
1960 Chevrolet C10
"A Family Heirloom"
Follow the story in the DITY Gallery
'59 Apache 31, 327 V8 (0.030 over), Muncie M20 4 Speed, GM 10 Bolt Rear... long term project (30 years and counting)

If you don't like driving yourTruck, you won't drive yourTruck..| Living life in the SLOW lane