The Stovebolt Site Forums The Shop Area The Tool Chest Drill Press Speed

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

1 members (klhansen), 92 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,049

Posts1,055,741

Members48,426

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Drill Press Speed #158778 01/27/2007 6:55 PM
Joined: Nov 2005 Posts: 49 Calgary Alberta Canada B Brian's40 Wrench Fetcher
Brian's40 Wrench Fetcher B Joined: Nov 2005 Posts: 49 Calgary Alberta Canada	Yes of course the press has pulleys and it is set for the slowest speed right now, 540 rpm, which is too fast for drilling thick steel. I'll have to try find a larger and smaller pulley combination to slow it down. Brian

Entire Thread
Subject	Posted By	Posted
Drill Press Speed	Brian's40	01/27/2007 4:25 PM
Re: Drill Press Speed	gtow69	01/27/2007 5:56 PM
Re: Drill Press Speed	Brian's40	01/27/2007 6:55 PM
Re: Drill Press Speed	atomarc	01/27/2007 6:59 PM
Re: Drill Press Speed	atomarc	01/27/2007 7:13 PM
Re: Drill Press Speed	Curt B.	01/27/2007 9:14 PM
Re: Drill Press Speed	Brian's40	01/28/2007 4:45 AM
Re: Drill Press Speed	J Lucas	01/29/2007 4:37 AM
Re: Drill Press Speed	Beaver 53	01/31/2007 3:35 AM

Moderated by MNSmith

Hop To

Link Copied to Clipboard