The Stovebolt Site Forums The Shop Area Paint and Body Shop 1950 chev truck front driver side fender

Well I remeasured after removing shims at driver rear shackle

Now front driver 1.71 vrs 1.83
Front passenger 1.94 vrs 1.83

Rear driver 1.50 vrs .76
Rear passenger 1.79 VRs .76

So generally speaking I am 3/4 high on the rear

Is there a way to shim my way out of this mess.Given the front should sit 1.07 higher at the front than the rear what if I raised the front to 2.86 both sides which is 1.07 higher the the rear passenger

The rear to 1.79 both sides
Front 2.86 both sides
What would be the negative consequences?