| |
Click on image for the lowdown. 
====
| | |
0 members (),
140
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,080 Posts1,055,953 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2005 Posts: 324 Member | | Member Joined: Dec 2005 Posts: 324 | drill for a reinforcing pin and use epoxy to glue them together. soft solder works on zinc alloys, but is not as strong.
"It ain't a truck if you can't hose out the cab."
| | | |
Entire Thread
|  
Lathe part deux,
| Jim Bow | 11/03/2006 10:45 PM | |
Re: Lathe part deux,
| ttodd | 11/04/2006 1:16 AM | |
Re: Lathe part deux,
| jbennett | 11/04/2006 5:03 AM | |
Re: Lathe part deux,
| Lonnie Gallaher | 11/06/2006 1:26 AM | |
Re: Lathe part deux,
| Jim Bow | 11/06/2006 3:04 AM | |
Re: Lathe part deux,
| atomarc | 11/06/2006 3:54 AM | |
Re: Lathe part deux,
| Curt B. | 11/06/2006 8:15 PM | |
Re: Lathe part deux,
| jbinwa | 11/07/2006 7:42 AM | |
Re: Lathe part deux,
| Jim Bow | 11/08/2006 4:57 PM | |
Re: Lathe part deux,
| atomarc | 11/08/2006 5:43 PM | |
Re: Lathe part deux,
| Chester | 11/12/2006 3:49 PM | |
Re: Lathe part deux,
| carolines truck | 11/13/2006 1:48 AM | |
|
|
| |
