I have been restoring a 55.1 3600. My progress has gotten me to the door glass. When I roll the window down it stops moving half way down. Looking down inside the door I see the glass channel is comes in contact with the vent post. I centered the channel on the glass. I am going to remove the glass today and move the channel away from the post. Knowing I have 3/8" to play with. But before I do all of this I wander if the glass will make contact with the post and stop the glass from freely move down.

1955.1 3600 5 window 4 speed all original except the 410 gears.
In the Project Journal