Got the truck unloaded and in the shop yesterday by pulling the spark plugs, a squirt of oil in each cylinder and let it set for a while. Then turned it over by hand some, hit the starter a few times and bumped the starter with it in gear to get it to roll off the trailer into the shop.

Blueman also gave me all the sales receipts from his rebuild, the original title from Illinois when he bought it in 1978 and a thumb drive with all the info of the rebuild with pictures. He also did a total engine rebuild, said the engine only has about 100 miles on it. Today I plan on cleaning the spark plugs, check the gap, install them and check the points gap and hope to start it. It has not been started in about 3 years.

Per a request, here are the pictures I took when I first went to look at it.

Don
Attachments
IMG_2030.jpeg (280.55 KB, 152 downloads)
IMG_2027.jpeg (191.66 KB, 152 downloads)
IMG_2026.jpeg (229.37 KB, 152 downloads)
IMG_2024.jpeg (167.22 KB, 152 downloads)
IMG_2022.jpeg (130.59 KB, 152 downloads)
IMG_2020.jpeg (199.93 KB, 153 downloads)
IMG_2019.jpeg (288.55 KB, 153 downloads)
IMG_2004.jpeg (325.13 KB, 153 downloads)


1967 GMC 9500 Fire Ladder Truck
"The Flag Pole"
In the Stovebolt Gallery
1946 2-Ton grain truck
1946 3/4-ton pickup,
1953 1-ton pickup
1957 1-ton flatbed dually,
1954 Pontiac Straight Eight
Of all the things I've lost in my life, I miss my mind the most!