I did the Hydrobooster swap and love it, this thing stops like NOW! I used a booster and Master Cylinder from a '90 GM Motorhome . Mine is mounted under the floor which added some complications. I made the lines myself, as well as the Booster Mount Bracket. I added the Power Steering pump and Alternator bracket.

As your mounts to the firewall it should be somewhat easier. I should tell you that my setup is a 4 wheel disc brake conversion. I had less than $300.00 in the Hydrobooster setup.
Attachments
20240629_113850.jpg (202.21 KB, 118 downloads)
Hydrobooster
20240629_113825.jpg (227.13 KB, 114 downloads)
Hydrobooster 2
20240701_192854.jpg (192.65 KB, 114 downloads)
Hydrobooster Mount
20240823_173849.jpg (190.35 KB, 116 downloads)
Hydrobooster Lines
20240823_173835.jpg (232.89 KB, 114 downloads)
Power Steering Pump and Bracket

Last edited by TUTS 59; 05/11/2025 2:28 PM. Reason: Add Images

~ Craig
1958 Viking 4400
"The Book of Thor"
Read the story in the DITY
1960 Chevrolet C10
"A Family Heirloom"
Follow the story in the DITY Gallery
'59 Apache 31, 327 V8 (0.030 over), Muncie M20 4 Speed, GM 10 Bolt Rear... long term project (30 years and counting)

If you don't like driving yourTruck, you won't drive yourTruck..| Living life in the SLOW lane