So I reversed the trim (left door trim to right door cover panel and vise versa). All looks much better, but the good (I assume) Chinese aftermarket cardboard panels are 1/10" less in height than they should be and pop out at the top. I have bend the trim slightly, but it still is not enough to hold them in. Probably the reason why the former owner installed them 'inside-out'.
One option would be to clue the top part of the trim with clear super-clue to the top part of the trim and hold it in-place on the workbench until it has hardened.
Still can't get the image manager to work. (fixed by Mod)
I will be quiet until early February!
Last edited by Gdads51; 01/11/20256:14 PM. Reason: removed image links from text box to allow attachment manager to display pictures
~ NORTH OF 49TH 1948 GMC Model 9434 Frame rebuild 1953 Chevrolet 1314 1/2 ton rebuild Follow along it the DITY Bay
