The Stovebolt Site Forums The Shop Area Paint and Body Shop 1953 Chev 1/2 ton Box Alignment

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

1 members (UtahYork), 88 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,142

Posts1,056,491

Members48,442

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 1953 Chev 1/2 ton Box Alignment Biermann #1567756 01/09/2025 10:24 PM
Joined: Sep 2010 Posts: 2,318 ONTARIO CANADA K KEVINSKI 'Bolter
KEVINSKI 'Bolter K Joined: Sep 2010 Posts: 2,318 ONTARIO CANADA	Is there two bolts at the bottom holding the rear bottom ,I have heard that some may have been spot welded from factory but if you loosen the bottom then pull the top over ,hold in place then tighten the bottom . 1954 Canadian GMC 9300 "The Journey" Follow in the DITY

Entire Thread
Subject	Posted By	Posted
1953 Chev 1/2 ton Box Alignment	Biermann	01/09/2025 4:56 PM
Re: 1953 Chev 1/2 ton Box Alignment	GMCJammer51	01/09/2025 6:01 PM
Re: 1953 Chev 1/2 ton Box Alignment	klhansen	01/09/2025 7:30 PM
Re: 1953 Chev 1/2 ton Box Alignment	KEVINSKI	01/09/2025 10:24 PM
Re: 1953 Chev 1/2 ton Box Alignment	Biermann	01/10/2025 12:56 AM
Re: 1953 Chev 1/2 ton Box Alignment	52Carl	01/11/2025 1:27 AM
Re: 1953 Chev 1/2 ton Box Alignment	Biermann	01/11/2025 5:54 PM
Re: 1953 Chev 1/2 ton Box Alignment	Biermann	03/01/2025 4:37 PM
Re: 1953 Chev 1/2 ton Box Alignment	WICruiser	03/02/2025 1:16 PM
Re: 1953 Chev 1/2 ton Box Alignment	52Carl	03/02/2025 10:22 PM
Re: 1953 Chev 1/2 ton Box Alignment	Otto Skorzeny	03/02/2025 11:01 PM
Re: 1953 Chev 1/2 ton Box Alignment	Biermann	03/03/2025 12:56 AM
Re: 1953 Chev 1/2 ton Box Alignment	Phak1	03/03/2025 12:40 PM
Re: 1953 Chev 1/2 ton Box Alignment	Biermann	03/03/2025 5:50 PM
Re: 1953 Chev 1/2 ton Box Alignment	Phak1	03/03/2025 8:21 PM

Moderated by klhansen

Hop To

Link Copied to Clipboard