I'm certain somebody sells it although offhand I can't recall the name of that piece. When I re-did mine I just cut two pieces of common inner tube, glued them together with plain contact cement and used that same cement to glue that to the metal piece. Cut it so it folds inward and not outward. Good luck!

Edit...sorry...by inward I mean pointing back in toward the wheel well. That little flap is to keep water, dust, etc from coming in as much

Last edited by Jon G; 08/06/2024 11:54 PM.
~ Jon
1952 1/2 ton with 1959 235 | T5 with 3.07 rear end