Done. I drilled a 1 3/8" hole on the spot of the dimple. Held the mount in place and marked the three hole. Drilled the holes and mounted the visor. The hardest part was getting the mount rod down into the visor.
The tool below is used to drill the large hole. They come in a variety of sizes.
Attachments
20240803_180956.jpg (205.65 KB, 76 downloads)
20240803_180911.jpg (161.7 KB, 76 downloads)
20240803_182940.jpg (90.64 KB, 63 downloads)

Last edited by MickeyP; 08/03/2024 11:32 PM.
1956 3100 three speed 6 cyl. Stock with a few upgrades.