| |
Click on image for the lowdown. 
====
| | |
0 members (),
133
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,157 Posts1,056,876 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2015 Posts: 81 'Bolter | | 'Bolter Joined: Sep 2015 Posts: 81 | Kind of depends on which wiring harness you're using. An original type is pretty much self-explanatory in which case you probably wouldn't have asked. So I'll hazard a guess that you're going to use something with a fuse block like the Speedway 12 circuit deal. I put the fuse block for one of those centered with the bottom corners just touching the X stamped into the firewall on the drivers side. That puts it high enough to be out of sight and low enough to reach the fuses.
Steve
Steve
1946 1/2 ton
| | |
|
|
| |
