Originally Posted by klhansen
Paul, If you have specific questions on dimensions, post them here and I'll try to help out.
Yeah, the repop panels aren't exact, for sure, and the FAM dimensions are based on factory parts.

Thanks Kevin, I spent the last hour trying to position the side sill/parking brake support and driver's side toe panel. For the sill to hit the 8.47" from the FOD means the rearmost part of the sill BARELY hits the inner rear corner panel, not sure if that is correct? Also, the small holes in the top of the sill every 6-8 inches do not line up with the floor. Off by 1-2 inches on each, indicating the sill needs to move rearward, meaning I miss that magical 8.47". Seems I need to focus on that measurement and everything else needs to accommodate it.

I will get some measurements and photos in the next 48 hours.

Thanks for the offer

Paul

1951 3100 5-window
with a '55 235/floor mounted 3-speed
Some of the story in ODSS
Most of it in The Shops Area wink