I’m in the process if replacing my front cab body to frame mounts and am unsure of how the assembly goes together. I have the Assembly Manual but it lists only part numbers and no description of what it is (eg. rubber pad). When I disassembled my mount, it had a strange piece if what appeared like stacked canvas between the cab and frame then below the frame mount a piece of rubber, square washer, lock washer then nut.

I purchased a kit from Classic Parts and it contained the bolt, nut, lock washer square washer and square 1/4” rubber washer. How is it assembled?
Attachments
IMG_2975.jpeg (287.6 KB, 90 downloads)
Existing washers/shims
IMG_2974.jpeg (155.64 KB, 84 downloads)
Assembly manual
IMG_1612.jpeg (79.39 KB, 83 downloads)


Last edited by Phak1; 11/19/2023 3:32 PM.
Phil
Moderator, The Engine Shop, Interiors and Project Journals

1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube
Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes
Project Journals
Stovebolt Gallery Forum