First had to cut metal out welded all the way around. Added extra braces from a 75 bed I had. Made brace spacers from lexan with hole saw. All cross braces leveled front to back. Cut trex type decking to lenth. This had a groove down both sides. Measure width of bed and figured out how much space to put in between. Cut alluminum strips to place in grooves between boards Bed floor is not bolted down it's just laying on braces There is a angle at front and rear over the edge. I'll post pictures but may not be in order. Doing it this way I can take it out and put back without removing bolts.
