The Stovebolt Site Forums The Shop Area Driveline Brake bleeding trouble and Residual pressure valves

Secondary question.

If you pump them do they get hard and you cannot push to the floor?

Did you get a Drum/Drum master cylinder as they are different than a disc/drum? Are the bowls the same size or different is a good indicator but not always 100%

And
remember that the frame mound master the the bowls are matched to the front and rear. As in the rearward port of master goes to rear of truck and front of master goes to front of truck.


(when viewing a firewall setup it "looks" backwards because master is turned around);

Technically on a true drum/drum master it does not matter as they are bored and setup the same BUT if you decide to convert to disc/drum if you setup a frame mount with rear to rear and front to front your lines will be correct for the switch.