| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,035 Posts1,055,556 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2005 Posts: 199 Wrench Fetcher | | Wrench Fetcher Joined: Feb 2005 Posts: 199 | Cut it loose beyond the booster and close it off by bending the line or take it loose at the T connection and plug that hole. Rolling and pinching of the steel brake line may not hold up to the pressure of your system and you might see some fluid leaking from your pinched line. http://community.webshots.com/album/556578325GieVWg?start=24 Check here and you can see what I did on my 61 c60 which has the same setup as your truck. Hpoe this helps,Hobert
"The Lord is my shepherd"
| | |
|
|
| |
