The Stovebolt Site Forums The Shop Area Paint and Body Shop primer on unsanded epoxy

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (klhansen, Otto Skorzeny, Wally / Montana), 58 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,052

Posts1,055,726

Members48,426

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

primer on unsanded epoxy #1496643 04/15/2023 7:57 PM
Joined: Feb 2019 Posts: 201 Huntingtown, MD 8 87GN nothing beats a try but a failure
87GN nothing beats a try but a failure 8 Joined: Feb 2019 Posts: 201 Huntingtown, MD	I found sanding inside of the cowl vent gutter, small gap, impossible. It went so well stripping the perimeter with a thin wire wheel. So, since I can't get in there to sand and I can't reintroduce the wire wheel, is there an old school remedy? 1955.1 3600 5 window 4 speed all original except the 410 gears. In the Project Journal

Entire Thread
Subject	Posted By	Posted
primer on unsanded epoxy	87GN	04/15/2023 7:57 PM
Re: primer on unsanded epoxy	MNSmith	04/15/2023 8:16 PM
Re: primer on unsanded epoxy	87GN	04/15/2023 8:24 PM
Re: primer on unsanded epoxy	Rabaut	04/15/2023 9:16 PM
Re: primer on unsanded epoxy	87GN	04/16/2023 11:29 AM

Moderated by klhansen

Hop To

Link Copied to Clipboard