I had a pretty productive weekend:

I finally got the rear drivers side spring removed, which I had to drill/air hammer out the rivets of the mounting bracket.

Jerry (a.k.a. Hot Rod Lincoln) and his grandson picked up all the stock components I wasn't going to use. The original engine/trans/rad/suspension/brakes/wheels/tires/steering will all find good homes in his future projects.

I started on the front upper/lower control arms of my C4 suspension. I removed the old ball joints and bushings, cleaned the control arms, and started to drill out the upper control arms. Hope to have these control arms done by Friday and then I'll dig into the rear suspension.

Before: https://photos.app.goo.gl/TbbpfrkJRpx1RSTr5

After (50% complete): https://photos.app.goo.gl/jSVRaLoCC4zumXGo7