| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,162 Posts1,056,960 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2019 Posts: 4,503 AD Addict & Tinkerer | | AD Addict & Tinkerer Joined: Feb 2019 Posts: 4,503 | My ‘52 3100 with ‘59 235 has a non resistor coil with a resistor mounted on firewall and a starter switch that has a 12v side terminal, that supplies a full 12 volts to the coil when starting. Once running that circuit disconnects and ithe. Oil is now powered thru the resistor circuit which drops the voltage to about 9 volts, so you don’t burn out you points.
When the industry went to 12 volt systems, this is the way they were installed by the factory.
Bottom line is I get full voltage to help start the truck then reduced voltage to help save the points.
Phil Moderator, The Engine Shop, Interiors and Project Journals1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc BrakesProject JournalsStovebolt Gallery Forum | | |
|
|
| |
