Thank you for everyone’s help. I had the wire from the starter wired to the key starter. Once I chased all the wires on the wiring diagram I realized my mistake. Now I have power to the horn, lights, radio, and heater.

You are all correct I have converted the truck to 12 volts.

For the heater I am using a step down block to go from 12 to 6 volts. Currently I am pulling the power for this off the passenger side of the amp meter. It works but is it the right place to pull the power from?

Thank you all once more.
Attachments

Last edited by ChevyDarren; 07/07/2022 5:56 PM.
Darren
Current Project - 1950 3100 5 Window with a rebuilt 216 and 3 speed trans