| |
Click on image for the lowdown. 
====
| | |
0 members (),
171
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,143 Posts1,056,494 Members48,442 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2014 Posts: 3,689 'Bolter | | 'Bolter Joined: Jan 2014 Posts: 3,689 | I’ve got a prototype PCV setup on my 235. Unvented oil fill cap that has the PCV and grommet. Getting its vacuum from manifold wiper port. FILTERED makeup air via a motorcycle breather clamped on the bottom of road draft tube.
I still need to find some time to test how much vac the crankcase is under. (Was going to test at the dipstick tube). But early results are good. No stinky vapors up front. No excessive smoke out back.
1951 3100
| | | |
Entire Thread
|  
PCV valve, side cover gasket
| moparguy | 03/19/2022 2:17 AM | |
Re: PCV valve, side cover gasket
| Hotrod Lincoln | 03/19/2022 2:55 AM | |
Re: PCV valve, side cover gasket
| moparguy | 03/19/2022 10:16 AM | |
Re: PCV valve, side cover gasket
| Justhorsenround | 03/19/2022 12:28 PM | |
Re: PCV valve, side cover gasket
| JW51 | 03/19/2022 1:54 PM | |
Re: PCV valve, side cover gasket
| Bill Hanlon | 03/19/2022 4:09 PM | |
Re: PCV valve, side cover gasket
| buoymaker | 03/19/2022 5:05 PM | |
Re: PCV valve, side cover gasket
| moparguy | 03/24/2022 6:40 PM | |
Re: PCV valve, side cover gasket
| buoymaker | 03/24/2022 7:07 PM | |
Re: PCV valve, side cover gasket
| Gord&Fran | 03/24/2022 8:28 PM | |
Re: PCV valve, side cover gasket
| buoymaker | 03/25/2022 1:01 AM | |
Re: PCV valve, side cover gasket
| moparguy | 03/25/2022 2:04 AM | |
|
|
| |
