| |
Click on image for the lowdown. 
====
| | |
2 members (RLB, Guitplayer),
139
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,080 Posts1,055,954 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2000 Posts: 591 'Bolter | | 'Bolter Joined: Jan 2000 Posts: 591 | I would suggest a manual: for example: https://www.classicparts.com/1956-6...oga_6QRcPLCYio9T_QFzlwsTq98aAj_REALw_wcBActually there are about 3-4 manuals ( 2 service, one parts; and a "PowerPak install manual). Just do a search on "chevy napco manuals" If it is the thread bearing adjusting nut you are questioning, it is " As tight as possible and back off 1/6 turn" as per the manual. They specify a special tool, but you can figure something out. don | | |
|
|
| |
