Hi guys, i have a 58 viking 60, my truck never had a factory wiper switch when i got it, someone must have taken it, cant seem to find a repop of it. I have the electric wiper motor and it only has 2 wires coming off it. I have a shop manual but it doesnt seem to say what feeds the motor power for high low and park, with 2 wires. Doesnt show the switch. Just says " note where it came from and replace them correctly when reinstalling" can someone help me figure out how to wire it? Im hoping to just pop a 3 pos switch in the dash for the time being until i can get a multispeed kit for it. Switch would have 3 poles. On, off, on. Which i figured could be used for low high and off, and if im feeding the motor power through the switch or switching ground. Any help would be appreciated i believe my wires are black/white, and white. In a flat 2 pin connector. Any info is helpful thanks!
