One cure for droopy door handles is to remove handle, clamp shaft in vise, heat and twist shaft so after the droop is figured in it's level and horizontal. Care must be taken during the twisting to not also bend the shaft. Once done it can never droop again since it is at the bottom of its travel when it is level. This 52 had the handle shaft twisted to where it was slightly above horizontal at rest which was easily corrected. This fix is PERMANENT.

[img]https://i.postimg.cc/zL9FbRDm/Suburban-painted-015.jpg[/img]

Last edited by coilover; 01/28/2022 8:42 AM.

Evan