| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,035 Posts1,055,564 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2005 Posts: 8,983 Sir Searchalot | | Sir Searchalot Joined: May 2005 Posts: 8,983 | 1. You don't blow bulbs because of a bad ground.
2. We don't know what truck this is.
3. You can't say "wiring is all good" if you are blowing bulbs. Something is NOT "functioning well".
4. We don't know what bulbs are blowing and if they all are on a 15 amp fuse.
5. We don't know if they are dual filament bulbs and just one filament is burning out.
6. You haven't told us anything that could possible allow us to help, except to fire off a dozen causes.
7. You sure need to explain that ground wire from "the switch" you added. as in: from what/to what?
8. Assuming "the switch" means the sigstat 900. There is NO ground wire associated with this switch.
9. "It's 15 amp fused"...what is IT? What part of "IT" is fused?
So give us some info per above. Be specific on each point. No. 2, 4, 5, 7, 8 & 9. Repeat: be specific.
These questions are to save us firing off two dozen causes.
Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. - William Penn
| | |
|
|
| |
