The Stovebolt Site Forums The Shop Area Engine Shop Stumped

Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?
Wrenching this Labor Day

Plenty of places to share.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

4 members (Gdads51, Otto Skorzeny, Cosmo, MickeyP), 72 guests, and 0 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,007

Posts1,055,279

Members48,418

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Stumped joeflanagan #1404402 04/02/2021 2:09 PM
Joined: Dec 2018 Posts: 2,450 Illinois F fixite7 'Bolter
fixite7 'Bolter F Joined: Dec 2018 Posts: 2,450 Illinois	joflanagan Yes there is a return spring on that idle cam,you have to wind it a little to get on the shaft flats then put your washer and screw on.

Entire Thread
Subject	Posted By	Posted
Stumped	joeflanagan	03/31/2021 4:47 PM
Re: Stumped	EdPruss	03/31/2021 10:50 PM
Re: Stumped	joeflanagan	04/01/2021 11:34 AM
Re: Stumped	fixite7	04/01/2021 11:43 AM
Re: Stumped	joeflanagan	04/01/2021 4:29 PM
Re: Stumped	fixite7	04/02/2021 2:09 PM
Re: Stumped	joeflanagan	04/02/2021 4:49 PM
Re: Stumped	joeflanagan	04/02/2021 4:54 PM
Re: Stumped	Justhorsenround	04/02/2021 4:56 PM
Re: Stumped	joeflanagan	04/02/2021 4:59 PM
Re: Stumped	John Milliman	04/02/2021 10:02 PM
Re: Stumped	joeflanagan	04/03/2021 10:30 AM
Re: Stumped	TerenceandMary	04/02/2021 6:36 PM
Re: Stumped	Gord&Fran	04/02/2021 7:25 PM
Re: Stumped	joeflanagan	04/02/2021 8:40 PM
Re: Stumped	Gord&Fran	04/03/2021 2:24 PM
Re: Stumped	Wrenchbender Ret.	04/02/2021 9:05 PM
Re: Stumped	joeflanagan	04/02/2021 9:55 PM
Re: Stumped	joeflanagan	04/02/2021 9:57 PM
Re: Stumped	JW51	04/02/2021 10:08 PM
Re: Stumped	Gord&Fran	04/02/2021 10:15 PM
Re: Stumped	Fox	04/03/2021 4:03 AM
Re: Stumped	John Milliman	04/03/2021 12:45 PM
Re: Stumped	JW51	04/03/2021 1:22 PM
Re: Stumped	Wrenchbender Ret.	04/03/2021 4:13 PM
Re: Stumped	JW51	04/03/2021 4:31 PM
Re: Stumped	joeflanagan	04/03/2021 6:43 PM
Re: Stumped	joeflanagan	04/03/2021 6:45 PM
Re: Stumped	JW51	04/04/2021 12:57 AM
Re: Stumped	Wrenchbender Ret.	04/03/2021 8:47 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard