Many moons ago, I was in here off and on and had 2 1948 GMC's. Well, after moving many times, I had to thin out my cars and trucks each time and the trucks ended up going.
Well, now I'm back but with a 1955 Chevy, and I'm actually starting to work on it.
It looks like some owner from a long time ago did a lot of mods to it that look to be '70s or '80s era but who knows.
I have a louvered hood, and an electric antenna behind the passenger door. Looks like someone had speakers not only in the door, but each corner above the driver and passenger heads.
It also has chrome door panels, and cowl, as well as an old switch for two gas tanks and a floor button for an air horn.
I saved the best for last, too. It has a heater under the seat, and the seat is out of something else but has two holes under it for the heat to go into to heat the seats.
It was originally a V8 and auto, which is missing but will get a 400 and turbo 400 trans.
Now what I've done so far, is added disk brakes to the front axle, picked up an '98 S10 rear end with disks and Eaton locker with 348? gears. Just today installed a power brake booster in the stock location and was cutting floor pans out to [censored] new ones in without rust holes.
My game plan is to make it safe to drive, but keep the custom things it came with.
Last edited by Peggy M; 04/26/2023 6:57 PM.
