The Stovebolt Site Forums The Shop Area The Tool Chest Drill Bit Sharpening

Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?
Wrenching this Labor Day

Plenty of places to share.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (Rusty Heaps, KCMongo), 65 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,005

Posts1,055,254

Members48,418

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Drill Bit Sharpening 2-Ton #1392978 01/17/2021 1:28 AM
Joined: Mar 2019 Posts: 1,003 Pittsburgh Pennsylvania G glenns towing 'Bolter
glenns towing 'Bolter G Joined: Mar 2019 Posts: 1,003 Pittsburgh Pennsylvania	The one i have is actually da cheap one. Looking at pics, i think it da 350x. It was an Xmas gift maybe ten years ago or better. It takes patience and follow directions. But works good. Especially for a novice. And and previously stated. Even is also key to a good sharpened bit. Last edited by glenns towing; 01/17/2021 1:31 AM. Reason: Forgot to mention

Entire Thread
Subject	Posted By	Posted
Drill Bit Sharpening	2-Ton	05/18/2018 11:36 AM
Re: Drill Bits	Grigg	05/18/2018 1:23 PM
Re: Drill Bits	2-Ton	05/18/2018 2:12 PM
Re: Drill Bits	VEW	05/18/2018 3:28 PM
Re: Drill Bits	John Milliman	05/18/2018 9:17 PM
Re: Drill Bits	Fred T	07/15/2018 6:26 AM
Re: Drill Bits	GIJOE298	07/17/2018 12:48 AM
Re: Drill Bits	Hotrod Lincoln	09/13/2018 4:20 AM
Re: Drill Bits	MNSmith	09/13/2018 12:56 PM
Re: Drill Bits	delux54panel	09/21/2018 5:37 AM
Re: Drill Bits	coilover	12/21/2018 1:17 PM
Re: Drill Bits	yar	01/19/2019 2:59 PM
Re: Drill Bits	Don T	02/26/2019 8:19 AM
Re: Drill Bits	fixite7	05/27/2020 2:32 PM
Re: Drill Bits	Doc.Hall	06/14/2020 12:09 PM
Re: Drill Bits	Phak1	06/14/2020 3:30 PM
Re: Drill Bits	fixite7	01/14/2021 11:36 PM
Re: Drill Bit Sharpening	Phak1	01/15/2021 2:38 PM
Re: Drill Bit Sharpening	2-Ton	01/15/2021 6:58 PM
Re: Drill Bit Sharpening	Hotrod Lincoln	01/15/2021 11:43 PM
Re: Drill Bit Sharpening	glenns towing	01/16/2021 2:10 AM
Re: Drill Bit Sharpening	Fox	01/16/2021 5:49 AM
Re: Drill Bit Sharpening	Hotrod Lincoln	01/16/2021 3:52 PM
Re: Drill Bits	Dexstar 64	01/16/2021 8:05 PM
Re: Drill Bit Sharpening	tclederman	01/16/2021 8:15 PM
Re: Drill Bit Sharpening	drdoug	01/16/2021 10:42 PM
Re: Drill Bit Sharpening	tclederman	01/16/2021 11:13 PM
Re: Drill Bit Sharpening	J Lucas	01/16/2021 11:28 PM
Re: Drill Bit Sharpening	glenns towing	01/17/2021 1:28 AM
Re: Drill Bit Sharpening	Hotrod Lincoln	01/17/2021 3:56 AM
Re: Drill Bit Sharpening	GMCJammer51	09/24/2021 4:04 PM
Re: Drill Bit Sharpening	Ol'55	05/27/2022 11:05 PM

Moderated by MNSmith

Hop To

Link Copied to Clipboard