The Stovebolt Site Forums The Shop Area The HiPo Shop 1937 cab 3/4 ton to half ton

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (jmoore, Cletus1950), 75 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,151

Posts1,057,007

Members48,460

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 1937 cab 3/4 ton to half ton #139066 09/25/2007 1:17 PM
Joined: Sep 2005 Posts: 99 Brandon, Manitoba C canuck Wrench Fetcher
canuck Wrench Fetcher C Joined: Sep 2005 Posts: 99 Brandon, Manitoba	I went and measured the frame on my '36 last night. It is exaactly 36" outside to outside. the front wheels are 55.5" center to center. It's kinda looking like the frame is too narrow for almost anything new. Don't know where to go from here. Bob 1936 Chevrolet Maple Leaf Truck

Entire Thread
Subject	Posted By	Posted
1937 cab 3/4 ton to half ton	MainJet	08/18/2007 10:22 PM
Re: 1937 cab 3/4 ton to half ton	Achipmunk	08/19/2007 2:38 AM
Re: 1937 cab 3/4 ton to half ton	MainJet	08/19/2007 5:42 AM
Re: 1937 cab 3/4 ton to half ton	bigbadswingdaddy	08/19/2007 10:37 PM
Re: 1937 cab 3/4 ton to half ton	6cylindersovertexas	08/19/2007 11:53 PM
Re: 1937 cab 3/4 ton to half ton	bigbadswingdaddy	08/20/2007 3:00 AM
Re: 1937 cab 3/4 ton to half ton	Achipmunk	08/20/2007 4:00 AM
Re: 1937 cab 3/4 ton to half ton	6cylindersovertexas	08/20/2007 5:09 AM
Re: 1937 cab 3/4 ton to half ton	MainJet	08/22/2007 6:49 AM
Re: 1937 cab 3/4 ton to half ton	Joe H	08/22/2007 2:46 PM
Re: 1937 cab 3/4 ton to half ton	35chev	08/22/2007 5:52 PM
Re: 1937 cab 3/4 ton to half ton	canuck	08/22/2007 11:07 PM
Re: 1937 cab 3/4 ton to half ton	MainJet	08/25/2007 5:55 AM
Re: 1937 cab 3/4 ton to half ton	canuck	09/25/2007 1:17 PM

Moderated by Fibonachu, KCMongo

Hop To

Link Copied to Clipboard