| |
Click on image for the lowdown. 
====
| | |
0 members (),
170
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,081 Posts1,056,078 Members48,434 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2014 Posts: 70 'Bolter | | 'Bolter Joined: Nov 2014 Posts: 70 | You should have at least 100 PSI of compression on each cylinder with no more than a 10% variance between cylinders. As far as cylinder wear you will find that the amount of taper and out of roundness will be the problem. Any cylinder with more than 5 thousands of out round will need to be bored. I am not sure what the spec is for taper.
ESum
| | |
|
|
| |
