| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,105 Posts1,056,542 Members48,448 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 2,832 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 2,832 | Most likely the lower section of the tube is still in the block and will have to come out the TOP before a new tube can be driven in. To keep from pulling the pan to drive out from the bottom I made up a bolt with a slide hammer hook to pull one out from above. The inside of the tube has to be threaded with a tap so the puller bolt can screw in. Many times the tube will start turning in the block and upward pressure while turning will work it out.
Evan
| | |
|
|
| |
