| |
Click on image for the lowdown. 
====
| | |
2 members (TUTS 59, KingG),
106
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,026 Posts1,055,400 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 2,832 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 2,832 | My engine run in stand worked for years with a 7# electric pump and a regulator set at 2.5 psi for most carbs. Now engines mounted on the stand call for anything from 25 psi to 65 psi for American engines and way high for some foreign ones. Welded fittings into a large (8g) freon jug where it can be pressurized with air through a regulator from 0-225 which is my dry line compressor limit. Jug also has return line fitting so both by-pass and variable voltage systems cam be used. CAUTION: This set up will flow fuel till jug runs dry so both a ball valve shut off and a fire extinguisher are wise. Works absolutely great without a trunk load of different pumps needed.
Evan
| | |
|
|
| |
